250L Non Metallic Mineral Bead Mill Machine Wet Grinding With 55 KW Motor And Gear Pump

250L Non Metallic Mineral Wet Grinding Bead Mill Machine With 55 KW Motor And Gear Pump

Allwin showed bead mill machines in different Exhibitions in virous industry. Each time there were much potential customers  paying much attention and counselling. Thses following pictures show the 30L bead mill machine, as its much more proper for transportantion and booth space.

1. 250L Non Metallic Mineral Bead Mill Technical Data

 

No	Main Parameters	SP250	Note
1	Explosion-proof motor (kW)	55 kW /75KW	( Non Ex-proof)
2	Effective volume of grinding chamber (L)	250L
3	Water pressure (MPa)	0.3
4	Cooling water consumption (L/min)	2.5 -3.5m3/h	Advise offer the Cooling water less 10°C
5	Dimensions:L*W*H (mm)	2500*1500*2100
6	Weight (kg)	2500

 

 

2. 250L Bead Mill Machine Configuration Instructions

 

No	Main parts	SP250  Non Explosion-proof	Notes
1	Material of External vessel	SUS 304 stainless steel
2	Material of Inner grinding vessel	9Cr18Mo Wearable Steel /stainless steel
3	Material of Dispersing shaft	40Cr with hard chromium plating
4	Material of Dispersing disk (agitator disk)	Cr12Mov steel/SUS 304 stainless steel
5	Feeding and discharging end covers on the cylinder	SUS 304 stainless steel
6	Static discharge screen ring	Wire Wound screen ring with 304.Gaps: 0.5mm.
7	Mechanical seal	Intelligent double mechanical seal with mandatory screwing-cooling system
8	Feeding pump	1.5” ARO diaphragm pump;	IngersoII Rand,  gear pump optional
9	Appliance configuration	Non Explosion-proof machine, suitable for water base materials, motor 55/75kW.Non Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves with NO ex electrical contacts., Control system (button type)
10	Fasteners and connecting parts	Stainless steel clamp-type connecting parts	Quick and convenient

 

 

3. Display  of 250L Bead Mill Machine

 

 

 

4. Advantages Of Bead Mill Machine

 

A. Successful cases in non metallic mineral industry, like titanium dioxide,talc,kaolin, clay, etc.

 

B. Customized design and research of dispering and grinding structure according to different wet grinding slurry. Each  niche field has a few structural differences(like different shapes of discs, virous diameters of discs,turbin centrifugal separator may be adjust,etc.)

 

C.Laboratory bead mill can do the testment if you don't believe and make a testment will feel safe.