100L 55kW Applied Pigment Paints Inks Papers Metal Nonmentalic Mineral Flow Discharging Wet Grinding Mill
The main feactures and introduces of Wet Grinding Mill:
1. Materials of Chamber for meeting different needs : SUSstainless steel, silicon carbide Ceramix, PU,Wearable alloy steel.
2. Decrease the temperature:
Applied self-owned double spiral cooling technology to enhance the heat rejection, with superior material with good thermal conductivity.
3. Strenghten the fineness: could make equipment according to your requiriments, meet nanometer ans micron fineness demands.
4. Enhance the efficiency:
According to effectively control more factors, such as grinding bead materials. size. material viscosity, chamber vulume, motor power, cooling,etc,which can effect efficiency to strengthen efficiency.
5. Improve the safety:
Equiped with safety-alarming system(optional), to warn if it operates incorrectly.
The main parameters:
| NO. |
Main parameter |
SP100 |
Note |
| 1 |
Main motor power(kW) |
55 |
3phase,380V 50Hz |
| 2 |
Effective Volume(L)
|
100 |
|
| 3 |
Water presure Mpa |
0.3 |
|
| 4 |
Cooling water consumption
(L/min)
|
2.5 -3m3/h |
The lower limit can be
selected for the water consumption, in case that the cooling water temperature is lower than 10℃.
|
| 5 |
Overall dimension (mm) |
2000*980*2000 |
|
| 6 |
Weight (kg) |
2000 |
|
The main instructions:
| No |
Main parts |
SP100 Horizontal Bead Mill |
Notes |
| 1 |
Outer chamber |
304 stainless steel |
|
| 2 |
Internal chamber |
304stainless steel |
|
| 3 |
Dispersing shaft |
40Cr with hard chromium plating |
Brand: NSK |
| 4 |
Dispersing disk |
304 Stainless steel |
|
| 5 |
Mechanical seal |
Double Mechanical seal with Pressure of 0.45 Mpa |
|
| 5 |
Feeding and discharging end covers on the cylinder |
304 stainless steel |
|
| 6 |
Turbine centrifugal separator and pegs |
304 stainless steel and YG6 pges |
|
| 7 |
Static discharge screen ring |
304 stainless steel screen ring with 304.Gaps: 0.5mm. |
|
| 8 |
Mechanical seal |
Intelligent double mechanical
seal with mandatory
lubricating-cooling system
|
|
| 9 |
Feeding pump |
1.5" aro diaphram pump |
Brand: Ingersoll Rand |
| 10 |
Operating control |
button type or PLC (optional) |
|
| 11 |
Electric configuration |
Explosion-proof motor(suitable for oil based materials). ex-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves with EX-proof electrical contacts. |
non explosion-proof optional (suitable for water based materials) |
| 12 |
Fasteners and connecting parts |
Stainless steel clamp-type
connecting parts
|
Quick and convenient |
The After sales service:
1. Video instructions for installation and commissioning, if need, we will arrange engineer to your factory.
2. 12-24H feedback any customers questions, firstly offer the video help you solving, if need arrange maintenance engineer for you.
The package and shipping: Be covered with anti-abrasion film and then packed in wooden boxes, then seashipping by FCLor LCL.
The Customer workshop:
If need more detailed information and Price, please don't hesitate contact Elva (Wechat orwhatapp:+86-15330332761) ,
Also Warmly welcome to visit us.
Your message must be between 20-3,000 characters!